|
Pepperl-Fuchs EGT-101 |
Isolated Repeaters |
||
 |
2-channel - ATEX approval - Inputs EEx ia IIC - DC 24 V supply voltage - Ex-parameters of the intrinsically safe circuits: U0 = 26 V, I0 = 93 Ma - Input: 0 mA ... 20 mA Output: 0 mA ... 20 mA |
||
| Katalog | |||
| Sertifika | PDF |
||
Pepperl-Fuchs EGT-105 |
Isolated Repeaters |
||
 |
The EGT-105 repeater transfers an electrical unit signal from the safe area to a hazardous area. A conversion of a current signal into a voltage signal or vice versa, is possible. The result is that the device can be delivered with different options. |
||
| Katalog | |||
| Sertifika | |||
 |
|||
|
Pepperl-Fuchs EG2-R |
Isolated switch amplifiers |
||
 |
The transformer isolated amplifier transmits digital signals from the hazardous area. Sensors per DIN 19234 (NAMUR) or mechanical contacts may serve as alarms. The control circuit can be monitored for lead breakage monitoring (LB). |
||
| Katalog | |||
| Sertifika | |||
|
|||
Pepperl-Fuchs EG4-R |
Isolated switch amplifiers |
||
The transformer isolated amplifier transmits digital signals from the hazardous area. Sensors per DIN 19234 (NAMUR) or mechanical contacts can serve as alarms. The control circuit can be monitored through lead breakage monitoring (LB). |
|||
| Katalog | |||
| Sertifika | |||
|
|||
|
Pepperl-Fuchs EGA-041-3 |
Solenoid drivers |
||
 |
The EGA-041 has a logic input with which the field device is controllable. Voltage signals |
||
| Katalog | |||
| Sertifika | |||
|
|||
Pepperl-Fuchs EG2-M2-DW |
Rotational speed controller |
||
 |
Output relay operating mode b16 (chan. 1), b18 (chan. 2) Logic-1: Output relay is energised and de-energised only when the set frequency is exceeded. Logic-0: Output relay is de-energised and energises only when the set frequency is exceeded. |
||
| Katalog | |||
| Sertifika | |||
|
|||
Pepperl-Fuchs EG1-M4-FSU |
Frequency converter |
||
 |
The frequency / current converter transforms the input frequency into an impressed DC current. It is designed for connection with a sensor per NAMUR. The unit can be controlled with a 24 V DC voltage signal via logic input d18. A load of 650 Ohm is allowed at the analog output. |
||
| Katalog | |||
| Sertifika | |||
|
|||
|
Pepperl-Fuchs EGA-041-3 |
Solenoid drivers |
||
 |
The EGA-041 has a logic input with which the field device is controllable. Voltage signals |
||
| Katalog | |||
| Sertifika | |||
|
|||
EKSH-03-T / ED2-SH-EX2.T |
Isolated Amplifier (Fail-Safe) |
||
 |
This device meets the safety requirements for the transistor equipment of furnace systems. The transformer isolated amplifier is fail safe. This means that in a fault condition, for example short circuit or component failure, the unit shuts down. This is accomplished by means of dynamic signal transmission channels. |
||
| Katalog | |||
| Sertifika | |||
|
|||
EKSH-03-T / ED2-SH-EX1.R1 |
Isolated Amplifier (Fail-Safe) |
||
 |
The transformer isolated amplifier is fail safe. This means that in a fault condition, for example short circuit or component failure, the unit shuts down. This is accomplished by means of dynamic signal transmission channels. When a fault occurs, the oscillation required for a Logic-1 signal breaks, forcing the output into an inactive state. |
||
| Katalog | |||
| Sertifika | |||
|
|||
Pepperl-Fuchs 2RSH / ED2-RSH-2 |
Relay Card |
|
 |
Multiple relay cards can be connected to the intrinsic safety transformer isolated amplifier with transistor output from Pepperl+Fuchs (see application on page 95). With this, interconnected safety circuits can be realized. |
|
| Katalog | ||
| Sertifika | ||
|
||
Pepperl-Fuchs ED2-UT-Ex2 / EGC-120 |
Converter |
|
 |
The ED2-UT-Ex2 is designed for the connection of Pt100 and Ni100 (2-, 3- or 4-wire sensors) resistance temperature sensors as well as model B, E, J, K, L, N, R, S or T thermocouples. A temperature linear, current signal of 0/4mA ... 20mA is available at the output. |
|
| Katalog | ||
| Sertifika | ||
|
||
Pepperl-Fuchs EG2-R |
Transformer Isolated Amğlifier |
|
|
These devices meet the safety requirments
for the electrical equipment of firing systems. |
|
| Katalog | ||
| Sertifika | ||
|
||
| STOKTA BULUNAN ÖZEL KARTLAR | ||
MUS 80 TV 80 |
Eckard |
Transmitter Power Supply Unit Type:5 926 184 |
II 949 |
Eckard |
DC Voltage İsolating ModuleType:5 949 624 |
F 3209 |
HİMA |
4 Channel Barier PTB Nr.Ex-79/2 010 x |
PMX 672 Z |
E&HAUSER |
Level Control Ex Zone 2 |
HTA 470 Z |
E&HAUSER |
Two Point Level Control Contacter |
FTM 480 Z |
E&HAUSER |
Alarm Level Monitor 100V 50/60HZ |
A SSY NO 800-09-9316-2 |
QUANTUM |
Power Req 5/12V-8W |
278-4520-00 |
Doric Instrum. |
Power Supply 278 |
594591 P/N-20669-003 |
Archive Corp. |
LR 56637 |
907C00654 |
NUDAQ |
ADL-ACL-6126 A+2 831 |
PCL 816/N8E00266202 |
Advantech |
Modular High Resulution DAS Card |
01B005-01 |
Micro Electr. |
Controller Serial:01030979 Rev.Nr.03.01.03 |
HP-IB 82335 |
HP |
82335-60001-3707-92-199835-00164 |
FCC:H9MSUN6307 |
CF |
E119801 94V0 04V0 |
